New Products
How to Start Driving a Trailer Truck More Fuel Efficiently? 2021-11-12

Chinese trucks sell best in Southeast Asia, particularly in Thailand, Vietnam, the Philippines, and other places, where the figure of Chinese trucks is frequently seen; in Vietnam, the share of Chinese trucks has even reached 50%. Trucks are also popular in Africa, where demand has reached 300,000 units.

The ongoing development of domestic trucks has drawn increasing attention to Chinese brands. African truck drivers adore not only Chinese trucks but also dump trucks, particularly used truck tractors. In Africa, used tractors are also popular. There is a high demand for trucks in Africa. After all, trucks are a mode of transportation, a large vehicle that makes transportation easier.

Large trucks are the driving force behind the logistics industry, and they are vital to the national economy and people's livelihoods. As we all know, the current logistics industry is in disarray, owing primarily to low freight and high costs. The vast majority of the daily consumption of large trucks is accounted for by tolls and fuel costs.

The toll is a fixed expense that cannot be reduced, whereas fuel costs can be reduced through technical means and operating habits. Here's how to drive large trucks more efficiently.

Great driving habits can reduce the occurrence of vehicle failures, extend vehicle service life, maximize vehicle operating benefits, and minimize fuel consumption, allowing every drop of fuel to be used effectively and obtaining a higher energy efficiency ratio. According to data, good operating habits can reduce fuel consumption by 10 to 15%.

Check these amazing ways to reduce the fuel consumption for your trailer truck:

· Maintain a proper tyre pressure

Too little tyre pressure raises the rolling resistance of the tyres, resulting in increased fuel consumption. Because large trucks are now overloaded, the tyre pressure should be higher than the standard value.

· Acceleration and smooth start

When the truck is ready to start, it must check the traffic conditions in the area. In addition to checking the mirror, the blind area of the vehicle must pay close attention to confirm the safety of the left and right, as well as grasp the timing of acceleration.

· Switching gears correctly and on time

Large truck engines, in general, have a wide range of maximum torque output and good low-speed torque. Usually, the speed ranges from 1000rpm to 1400rpm at high torque output, and from 1100rpm to 1300rpm at low torque output. As a result, the best-turbocharged diesel engine operating mode is a low-speed, high load. When driving, we pay attention to the throttle control and gearbox gear; if we can keep the engine tachometer pointer in the green range, we will save more fuel.

· Keep a safe driving speed

The economic speed of large trucks is generally 40-60km/h, and it is best to maintain a highway speed of 80-100km/h. At this point, the gearbox should be of the highest quality, and the engine tachometer indicator should be in the green zone. Keep the economy of the speed of uniform driving more fuel-saving under the premise of safety.

Follow for more insightful blogs.

Contact Information

Whatsapp : 8613666007515